1 Hydraulic Hose Pressure and Application and Production Process and Company Profile

SAE 100R1 high tensile steel wire braided medium pressure hose
Option One (high abrasion):

SAE 100R1 single wire braided hose
Cover: modified nitrile;
Max working pressure: 3625 psi (at 3/16");
Tube: Excellent oil resistant Nitrile;
Reinforcement: single high tensile strength steel wire braid;
Working temperature: -40 to +100°C (-40 to +212°F);
Safety factor: 4:1;
Inside diameter: 3/16" to 2";
Pressure grating: 3045psi (at 3/16", type AT) and 3625 psi (at 3/16", type S);
Pressure grade: medium.

Option Two (high temp):
Pressure grating: 3045psi (at 3/16", type AT) and 3625 psi (at 3/16", type S);
Safety factor: 4:1;
Tube: Excellent oil resistant Nitrile;
Max working pressure: 3625 psi (at 3/16");
Working temperature: -40 to +100°C (-40 to +212°F) or as ordered;
Inside diameter: 3/16" to 2";
Reinforcement: single high tensile strength steel wire braid;
Cover: abrasion and weather resistant Chlorosulphonated Polyethylene (CSM);
Pressure grating: medium.

1 Hydraulic Hose Pressure

Your hydraulic hose will need to withstand the working pressure of the application, as well as any additional pressure that could be caused by fluctuations within the system.  Careful consideration of the specific application must be made to assure the hose is properly selected for best durability and safety.

1 Hydraulic Hose Application

Different applications require different hoses. Many hoses are custom-built assemblies made to meet specifications for a prescribed application need. Consider the system configuration, fluid type, and product routing, and hose orientation to determine the best hose for the job.  Normally, if the hose is to be used as a replacement of an existing hose, replacing with the same type/rating of hose is a good choice for similar durability and performance expectations.

SAE 100 R1 steel wire reinforced hydraulic hose:
1、Tube: high quality oil resistant synthetic rubber, making the hose work well in delivering oils.
2、Structure: it is composed of three parts: tube, reinforcement and cover.
3、Working temperature: -40 °C to +100 °C.
4、Reinforcement: one layer of high tensile braided steel wire, making the hose work well in high pressure environment.
5、Cover: high quality synthetic rubber, making the hose resistant to abrasion, corrosion, weather, ozone, aging and cut.


1 Hydraulic Hose Production Process:

1 Hydraulic Hose Production Process 2022

Ordering A Custom Made Hydraulic Hose Assembly

1 Hydraulic Hose Company Profile:

Sinopulse Hose Factory Co., Ltd. is a leading company in manufacturing high pressure hoses and our products are sold very well both at home and abroad. High pressure hoses - the most important part of modern equipment, are widely used for all hydraulic systems, gas and water supply to deliver fluids under pressure (oils, fats, emulsions and others).
Hoses are made of different materials with different technologies depending on the operating environment, limiting pressure, climatic conditions and the fluids that they convey. Our high pressure hose products give the best solutions for customers to solve the fluids problems in hydraulic systems.We hydraulic hose manufacturer provide automotive rubber hose,Choose us, you can be get most careful and thoughtful service.