About Sandblasting hose
4-Ply Hoses
If you’re in the market for a serious piece of abrasive blasting equipment with more support and higher pressure than a 2 braid or Supa hose, then the 4 ply abrasive blasting hose is the natural next step.
Our 4 ply blast hose is made with two liners:
An abrasive resistant natural rubber liner consisting of four layers with a high tensile
A textile cord reinforced liner
The casing is weather, ozone, and abrasion resistant, making it the ideal piece of blasting equipment for industrial settings. Crewmen typically move up to the 4 ply hose when working near railroads or shipyards knowing they can rely on the reinforced exterior. This blast hose is tough enough to withstand the typical weathering caused from dragging and won’t collapse under the weight of light traffic.
The 4 ply hose can be paired with any standard couplings, nozzle holders or blasting machine. Due to the high tensile, the 4 ply hose is typically paired with other attachments to increase flexibility on the job. The twin hose and dead man control, which are sold separately, are our top pairing items for this blast hose. Each attachment provides increased control when moving about the blast site which ensures a safer workspace.
Each 2-ply hose comes with reinforced features, just like our 4-ply series, and is often used for similar industrial jobs.
A 2 ply sandblasting hose is made with two liners:
An abrasive resistant natural rubber liner consisting of two layers
A high tensile, textile cord reinforced liner.
As mentioned above, the cover of the hose is weather, ozone, and abrasion resistant. The small inside diameter sandblasting hose can be used for shorter runs and as a sandblasting cabinet hose. It can also be used as your “whip hose,” or the final 10 to 15 ft at your blast nozzle for better control.
Our 2 ply sandblasting hose is sold in 10″, 25″, 50″, 100″ and bulk 200″ +/- 6 inches.
Sinopulse Hose Factory Co., Ltd. is a leading company in manufacturing high pressure hoses and our products are sold very well both at home and abroad. High pressure hoses - the most important part of modern equipment, are widely used for all hydraulic systems, gas and water supply to deliver fluids under pressure (oils, fats, emulsions and others).
Hoses are made of different materials with different technologies depending on the operating environment, limiting pressure, climatic conditions and the fluids that they convey. Our high pressure hose products give the best solutions for customers to solve the fluids problems in hydraulic systems.We hydraulic hose manufacturer provide low pressure hydraulic hose and high pressure hydraulic rubber hose,Choose us, you can be get most careful and thoughtful service!
Sandblasting Hose Length
Contractors need two hoses for abrasive blasting jobs and each requires a different length to ensure the best blasting power. The first hose is the one attached from the air compressor to the blast pot and the second hose runs from the blast pot to your work surface. The first hose is typically longer and requires a larger ID size because the compressor, unlike the blast pot is not highly portable. A longer hose from compressor to blast pot give your more mobility and the larger ID ensures that the blasting medium gets to the pot. The second hose from blast pot to work surface should be short, so you can get the maximum amount of pressure from the hose.
Sandblasting Hose Id Size
The hose should be 3 times bigger than the nozzle size.Improper sizing causes unnecessary wear and tear on the inside of your blasting tube which leads to a shorter lifespan for your equipment. Proper sizing not only increases the lifespan, but ensures that the air pressure is not lost from hose to surface.
Sandblasting Hose Application
Application: Delivering quartz and metal sand, polishing, riding rust on metal surface and spraying cement. It is manufactured with anti-static rubber granting a complete discharge of static electricity.
Temperature Available: -20℃ to 100℃
Character：anti-static electricity, with copper wire reinforcement.
Specifications:
Sandblasting hose, also called sand blast rubber hose and flexible reinforced sand blast hose, it is a type of suction and discharge hose for sand blasting with air compressed machine.
Structure of sand blast hose
The sand blast hose has same structure with slurry hose and dredge hose, which is composed of three layers: inner layer, reinforcement layer and cover layer.
Rubber material make the sand blast hose excellent abrasion resistance and durable life. The sand blast hose can be added with flanges, which make it easy to install and dismantle onto pipeline tightly.
Different from others rubber hoses, which the reinforcement layer is fabric or steel wires or meshes. The discharge and suction hoses including sandblasting hose are composed of both cord thread or fabric and spiral steel wire as the reinforcement layer.
Sand blast hose is widely used in the water & electricity, mining industry, military defense and other fields for derusting, sand reclamation and other applications.
Sandblasting Hose Markets:
• Construction
• Metal working
• Ship building
Inner layer. High quality rubber for high wear and abrasion resistance.
Main materials of inner layer is polyurethane and butyl rubber. The raw materials are added into special reinforcing agents, which make the inner layer high abrasive resistant, high toughness and high pressure resistant. The abrasive performance is equal to 2 or 3 times of traditional sandblasting pipes.
Reinforcement layer. Suitable for both low or high working pressure conditions.
Fabric reinforcement + steel spiral wire reinforcement. It is suitable for the low working pressure applications.
